Shaker Wall Panel Kit

The Shaker wall panelling kit consists of stiles and rails that are made from 9mm moisture resistant mdf that come in loose components. Top mouldings are sold separately. This open backed kit uses the wall as the panel and when painted in the same colour, looks as if the whole wall is panelled. If the wall surface is very rough, then you could place an mdf sheet on the wall first, then place the kit in front but in most cases this is not needed. Each kit has 6no. 135mm high legs to support the base rail if not using existing skirting board, 4no. 1.1m x 90mm horizontal rails and 6no. 600mm high x 90mm wide stiles. The moisture resistant mdf is unfinished, after fitting, it needs to be primed, lightly sanded then an undercoat and finish coat of paint applied.